| ..:: TRACKWHORES.com ::.. http://www.trackwhores.com/ | |
| Dunlop Tire Warmer Use Info http://www.trackwhores.com/viewtopic.php?f=57&t=1197 |
Page 1 of 1 |
| Author: | madski [ Mon Jul 11, 2011 10:43 am ] |
| Post subject: | Dunlop Tire Warmer Use Info |
http://www.dunlopracing.com/Warmers.pdf Tire Warmer Recommendation Procedures 1) Set temperatures for warmers to 70c (158 F) or MEDIUM or ON depending on style of warmers. Heat for 45 - 60 minutes. Front and Rear tires same. 2) Set the hot starting pressure immediately before going out on the track (see PRESSURE RECOMMENDATION chart) 3) If the bike returns to the pits and is then going straight out on the track, DO NOT reset the pressures to the starting pressure. 4) If the bike is going sit in the pits between sessions; put the warmers on and leave unplugged. Then 20-30 minutes before your session, plug them in. 5) If the bike is going to sit more than 2 hours, start back at #1 above before the next session. Call your distributor below for any other tech questions: Get pressure recommendations from http://www.dunlopracing.com/pressures.pdf East of the MississippiRace Tire Service800-772-8473 West of the MississippiErion Racing800-700-3599 |
|
| Author: | stevedave [ Mon Jul 11, 2011 5:10 pm ] |
| Post subject: | Re: Dunlop Tire Warmer Use Info |
Good post because it is amazing how many questions people have about the tire warmer process. Only thing I would add is if you have dual temp warmers, for #4 instead of leaving unplugged put them on low and then flip to high 20-30 minutes before as recommended. |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ | |