..:: TRACKWHORES.com ::..
http://www.trackwhores.com/

Giving the 675 one more chance
http://www.trackwhores.com/viewtopic.php?f=7&t=116
Page 1 of 5

Author:  madski [ Sat May 16, 2009 12:08 pm ]
Post subject:  Giving the 675 one more chance

found a harness for $50 shipped so I picked it up. going to try that and then an ECU if it's still doing stupid shit and if that does not work I'm done with it.

for some reason something about that bike just draws me into further degrees of mechanical (and financial) masochism.

Author:  chia [ Sat May 16, 2009 1:05 pm ]
Post subject:  Re: Giving the 675 one more chance

yeah, you have lots of time into that bike, It would suck giving up on it in my opinion. Give those two things a shot, and Hopefully it works out for ya! GOOD LUCK!

Author:  silvr6 [ Mon May 18, 2009 8:51 am ]
Post subject:  Re: Giving the 675 one more chance

Hopefully thats the fix

Author:  madski [ Sat May 23, 2009 11:09 am ]
Post subject:  Re: Giving the 675 one more chance

got the harness yesterday. looks like it's in one piece. i'll probably test the thing as much as i can before i try putting it in.
got the tires on the gix and changed the oil so i can roll it aside till it's next outting and make some room to start tearing into the 675 again.
now just to find the time...

Author:  chia [ Sat May 23, 2009 11:13 am ]
Post subject:  Re: Giving the 675 one more chance

if ya need help or anything Mike just give me a shout...Im the best flashlight holder around. :boobies:

Author:  madski [ Sat May 23, 2009 12:37 pm ]
Post subject:  Re: Giving the 675 one more chance

i may take you up on that :-)

if I ever get it running i'm thinking about doing something like this for a paint job:

Image

Author:  chia [ Thu Jun 04, 2009 7:54 am ]
Post subject:  Re: Giving the 675 one more chance

are you gettin any further with the 675 mike?

Author:  madski [ Thu Jun 04, 2009 7:59 am ]
Post subject:  Re: Giving the 675 one more chance

put it back up on stands, took off all the plastics, got the tank, airbox, intakes, etc. off. Put a set of clip-ons back on it, clearing out everything so i can get to the harness. just need a few hours to get the new harness in an see if that does the trick or at least gives direction - which i sort of doubt.

Author:  chia [ Thu Jun 04, 2009 8:05 am ]
Post subject:  Re: Giving the 675 one more chance

well like i said,,,if ya need any help give me a shout. you could always use someone with my expertise around! :nod:

Author:  silvr6 [ Thu Jun 04, 2009 8:17 am ]
Post subject:  Re: Giving the 675 one more chance

hope it works out

Page 1 of 5 All times are UTC - 5 hours [ DST ]
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/