Author |
Message |
foster
|
Post subject: Re: SS brake lines Posted: Fri Sep 24, 2010 3:47 pm |
|
|
Serious 'Ho |
|
Joined: Wed Sep 16, 2009 3:04 pm Posts: 383 Location: Buffalo, NY
Current TrackWhore(s): K7 GSXR 750
Bike/Plate #: 535
|
madski wrote: you can always for get some DOT 4 and use that to get all the air out of the system and then finish off by pushing that stuff out with the goood fluid. That's exactly what I was thinking after posting. The local stealer sells repsol dot 4 but it boils lower than the RBF so I'll bleed with that and then fill with what I have left of the RBF.
_________________ Ben #535
|
|
|
|
|
stevedave
|
Post subject: Re: SS brake lines Posted: Tue Sep 28, 2010 7:32 am |
|
|
Major 'Ho |
|
Joined: Tue Apr 28, 2009 5:48 pm Posts: 984 Location: PA
Current TrackWhore(s): 2009 Yamaha R6
Bike/Plate #: 65
|
madski wrote: Just about any master will work - the recent R6/R1 masters are the cheap option, Brembo 19X18 or RCS is the (better) but far more costly option. Is there anything I need to be worried about as far as fitment? Hoses, adapters, etc fitting the new master? Are they all pretty much the same, just internals are different? More I think about this I want to do this, but I don't want to buy a master for an R6/R1 online and then find I can't use it on my bike.
|
|
|
|
|
madski
|
Post subject: Re: SS brake lines Posted: Tue Sep 28, 2010 9:16 pm |
|
|
Site Admin |
|
Joined: Wed Apr 22, 2009 1:27 pm Posts: 3474
Current TrackWhore(s): Daytona 675 (track) R1 (street)
Bike/Plate #: 369
|
You should not have any real issues - does your master have a single or both lines going up to it? The R1 is set up for 2, as I believe is the R6, but if you only have 1 all you would need to do is reuse your current banjo bolt. Brake switch is not an issue for you so.... The only other thing might be if your reservour is mounted to your current master you'll have to get a bracket (but I don't believe that is the case on the 636). You will obviously also need to get a bottle of good fluid to flush the system after installing the new master.
_________________ Ἢ τὰν ἢ ἐπὶ τᾶς www.WickedRacing.com - Go Fast Parts & Gear for Riders and Their Motorcycles PM me for "TrackWhore" special discounts
|
|
|
|
|
stevedave
|
Post subject: Re: SS brake lines Posted: Tue Sep 28, 2010 9:22 pm |
|
|
Major 'Ho |
|
Joined: Tue Apr 28, 2009 5:48 pm Posts: 984 Location: PA
Current TrackWhore(s): 2009 Yamaha R6
Bike/Plate #: 65
|
madski wrote: You should not have any real issues - does your master have a single or both lines going up to it? The R1 is set up for 2, as I believe is the R6, but if you only have 1 all you would need to do is reuse your current banjo bolt. Brake switch is not an issue for you so.... The only other thing might be if your reservour is mounted to your current master you'll have to get a bracket (but I don't believe that is the case on the 636). You will obviously also need to get a bottle of good fluid to flush the system after installing the new master. Bike is at my parent's house, so not 100% sure....I believe both lines run up to the master and I already have a bracket that mounts the resevoir to the clip on, not the master.
|
|
|
|
|
madski
|
Post subject: Re: SS brake lines Posted: Tue Sep 28, 2010 9:24 pm |
|
|
Site Admin |
|
Joined: Wed Apr 22, 2009 1:27 pm Posts: 3474
Current TrackWhore(s): Daytona 675 (track) R1 (street)
Bike/Plate #: 369
|
if you don't have SS lnes you might want to do it all in one shot and save having to fuck with it twice.
_________________ Ἢ τὰν ἢ ἐπὶ τᾶς www.WickedRacing.com - Go Fast Parts & Gear for Riders and Their Motorcycles PM me for "TrackWhore" special discounts
|
|
|
|
|
stevedave
|
Post subject: Re: SS brake lines Posted: Wed Sep 29, 2010 6:42 am |
|
|
Major 'Ho |
|
Joined: Tue Apr 28, 2009 5:48 pm Posts: 984 Location: PA
Current TrackWhore(s): 2009 Yamaha R6
Bike/Plate #: 65
|
madski wrote: if you don't have SS lnes you might want to do it all in one shot and save having to fuck with it twice. Already have SS lines, but that is a good point for those who don't...
|
|
|
|
|
GixxrSixxr
|
Post subject: Re: SS brake lines Posted: Wed Sep 29, 2010 1:20 pm |
|
|
'Ho Extraordinaire |
|
Joined: Tue Apr 28, 2009 2:17 pm Posts: 1371 Location: York, PA
Current TrackWhore(s): 2007 Yamaha R6
Bike/Plate #: 45
|
why dont you just buy a new bike with brembo master and save yourself the hassle
_________________ LETS GO PRAIRIE DOGGIN!!!!!!!!!YEEE HAWWWW!!! WERA & NESBA #45
|
|
|
|
|
|