..:: TRACKWHORES.com ::.. http://www.trackwhores.com/ | |
Sprocket tooth count -> gearing http://www.trackwhores.com/viewtopic.php?f=7&t=946 |
Page 1 of 1 |
Author: | stevedave [ Sun Sep 19, 2010 8:19 pm ] |
Post subject: | Sprocket tooth count -> gearing |
Stock for my 03 636 is 15/40. What is the normal recommendation for a tooth count for most 600's? I've read -1f/+1r and -1f/+2r? Haven't had a chance to count the teeth on my bike right now to see what I am currently running, but wondering what you guys run. |
Author: | GixxrSixxr [ Sun Sep 19, 2010 10:03 pm ] |
Post subject: | Re: Sprocket tooth count -> gearing |
-1, +2 |
Author: | bacolmm [ Sun Sep 19, 2010 10:24 pm ] |
Post subject: | Re: Sprocket tooth count -> gearing |
I'm running +2 in the rear right now. I would probably benefit from going -1 in the front... |
Author: | lantry211 [ Mon Sep 20, 2010 7:33 am ] |
Post subject: | Re: Sprocket tooth count -> gearing |
-2 in the front |
Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |